Intellijel Metropolix Manual page 37

For example, assume each stage has a PULSE COUNT = 1, and you hold down the
Stage 1 and Stage 4 buttons. If LOOP PULSES = 3 , then Loopy will play the following
pattern:
Forward : 1 2 3 | 1 2 3 | etc...
Reverse : 3 2 1 | 3 2 1 | etc...
● If LOOP PULSES > the PULSE COUNT total of the stages within the loopy cycle, then
loopy will continue cycling through all the stages until it has played the requested
number of pulses. For example, assume each stage has a PULSE COUNT = 1, and you
hold down the Stage 1 and Stage 4 buttons: If LOOP PULSES = 5 , then Loopy will play
the following pattern:
Forward : 1 2 3 4 1 | 1 2 3 4 1 | etc...
Reverse : 4 3 2 1 4 | 4 3 2 1 4 | etc...
NOTE: The LOOPY (
(or if Loopy is latched
playback via its Loopy settings, and not its Track settings).
4. Press and hold any other combination of two Stage buttons to shift the loopy region to begin
and end at those stages.
5. Release the held Stage buttons.
Loopy returns to playing your original sequence at the point it would be at had Loopy not been
triggered.
∞
) button will glow blue
). The blue LOOPY button indicates you're currently hearing the track
Metropolix Manual
while your two fingers are on the Stage buttons
36