Intellijel Metropolix Manual page 100

In Use:
1. Press the ALT button followed by the
configuration screen.
2. Press the encoder to toggle between editing (and highlighting) the CLK OUT and CLK OFFSET
parameters.
3. With the CLK OUT field highlighted, turn the encoder to set the desired output clock division
(from /1 to /256).
4. With the CLK OFFSET field highlighted, turn the encoder to set the desired clock offset
(from '0' to 'one less than the CLK OUT value').
5. To reset all CLK
CLK
parameters back to their default values, long-press the encoder.
Metropolix Manual
(Stage 5) button to open the CLOCK OUT
99