System Health And System Id Indicator Codes - Dell PowerEdge XR12 Installation And Service Manual

Table 34. Status LED indicators and descriptions (continued)
Icon Description
Memory indicator The indicator turns solid amber if a
PCIe indicator

System health and system ID indicator codes

The system health and system ID indicator is located on the Status LED Control Panel of the system for Rear and Front
Accessed configurations.
Figure 140. System health and system ID indicator
128 System diagnostics and indicator codes
Condition
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Corrective action
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see the
Getting help section.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
Getting help section.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
Getting help section.
NOTE: For more information about the
supported PCIe cards, see the
installation guidelines section.
Expansion card