Table of Contents
Advertisement
Removing a power supply unit blank
Prerequisites
Follow the safety guidelines listed in the
NOTE:
The procedure to remove the power supply unit blank is the same for Rear Accessed and Front Accessed
configurations.
Steps
Pull the blank out of the system.
CAUTION:
To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a
non-redundant configuration. Remove the PSU blank only if you are installing a second PSU.
NOTE:
You must install a power supply blank in a unused slot to maintain Federal Communications Commission (FCC)
certification of the system. The blank also keeps dust and dirt out of the system and aids in proper cooling and airflow inside
the system.
Figure 108. Removing a power supply unit blank
Next steps
Replace the
PSU
or
PSU
Installing a power supply unit blank
Prerequisites
1. Follow the safety guidelines listed in the
NOTE:
Install the power supply unit (PSU) blank only in the second PSU bay.
2.
Remove the
PSU.
NOTE:
The procedure to install the power supply unit blank is the same for Rear Accessed and Front Accessed
configurations.
Steps
Align the PSU blank with the PSU bay and push it into the PSU bay until it clicks into place.
98
Installing and removing system components
Safety
instructions.
blank.
Safety
instructions.
Advertisement
Table of Contents
