Table of Contents
Advertisement
Table 37. NIC indicator codes (continued)
NIC indicator codes
Link indicator is green, and activity indicator is blinking
green.
Link indicator is amber, and activity indicator is blinking
green.
Link indicator is green, and activity indicator is off.
Link indicator is amber, and activity indicator is off.
Link indicator is blinking green, and activity is off.
Power supply unit indicator codes
AC and DC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator. The indicator shows if
power is present or if a power fault has occurred.
Figure 142. Rear Accessed configuration - AC PSU status indicator
1. AC PSU handle
2. Socket
3. Release latch
Figure 143. Front Accessed configuration - AC PSU status indicator
1. AC PSU handle
2. Socket
3. Release latch
130
System diagnostics and indicator codes
Condition
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is not being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is not being sent or received.
Indicates that the NIC identity is enabled through the NIC
configuration utility.
Advertisement
Table of Contents
