Removing The Drive From The Drive Carrier - Dell PowerEdge XR12 Installation And Service Manual

Figure 66. Installing a drive carrier
Next steps
If removed, install the front bezel.

Removing the drive from the drive carrier

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
Steps
1. Using a Phillips #1 screwdriver, release the screws from the slide rails on the drive carrier.
NOTE: If the drive carrier has Torx screw, use Torx 6 (for 2.5-inch drive) screwdriver to remove the drive.
2. Lift the drive out of the drive carrier.
62 Installing and removing system components