Drive Cage; Removing The Drive Cage - Dell PowerEdge XR12 Installation And Service Manual

Table 25. Connector descriptions for PIB to Riser 2 with double-width, full-length GPU
From
GPU_PWR1 (PIB power cable connector)
Figure 80. PIB to Riser 3 with double-width, full-length GPU
Table 26. Connector descriptions for PIB to Riser 3 with double-width, full-length GPU
From
GPU_PWR2 (PIB power cable connector)

Drive cage

This is a service technician replaceable part only.

Removing the drive cage

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the drives.
4. Remove the backplane.
NOTE: The procedure to remove the drive cage is the same for Rear Accessed and Front Accessed configurations.
Steps
1. Using the Phillips #2 screwdriver, loosen the blue thumbscrews.
2. Hold and lift the drive cage out of the system.
72 Installing and removing system components
Safety instructions.
Before working inside your
To
GPU_PWR (GPU power cable connector)
To
GPU_PWR (GPU power cable connector)
system.