Table of Contents
Advertisement
Figure 95. Installing the processor carrier
3. To align the processor tray with the bracket, press down on the bracket with your fingers on all four sides until it clicks into
place.
NOTE:
Ensure that the processor is securely latched to the processor carrier.
Figure 96. Press the carrier on the four sides
4. If you are using an existing heat sink, remove the thermal grease on the heat sink by using a clean lint-free cloth or the
cleaning pad that came with the processor kit.
5. Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral on the bottom of the heat
sink.
88
Installing and removing system components
Advertisement
Table of Contents
