Closing The Device - SMA Sunny Island 5048 Installation Instructions Manual

Opening and Closing

5.2 Closing the Device

When closing the Sunny Island 5048, make sure that the tooth lock washers are
under the six Allen screws. They secure the ground connection of the cover.
Before installing the housing cover of the Sunny Island 5048,
ensure that all cables are properly laid and that all tools have
been removed from within the housing (see section 6 "Electrical
Connection" (Page 33)).
1. Starting from the front, place the cover evenly on the
housing.
2. Attach the housing cover onto the Sunny Island 5048 using
the six Allen screws. Tighten the screws evenly and firmly.
Page 32 SI5048-11:EE4206
SMA
Technologie AG
Technical Description