Operation - SMA Sunny Island 5048 Installation Instructions Manual

SMA
Technologie AG

Operation

10 Operation
The main menu consists of a Home Screen and the
other main menu items where branches can be
created in the sub menus. Operating modes are
displayed on the Home Screen, e.g. the current
operating mode, performance, etc. (see section
10.6 "Display Messages (Overview)" (Page 73)).
The menu consists of a main menu and maximum
two submenu levels (see also the figure in section
10.1 "Menu Structure" (Page 66)).
Use the up and down arrow keys to navigate
through the menu levels. The cyclical arrangement
(wrap around) allows you to scroll both forward
and backwards to access the desired menu as
quickly as possible.
If you would like to access submenu 7, go backwards starting from 1 and
continue past 9, instead of going six steps forwards.
Once you have reached the desired menu, press <ENTER> to access the menu. Use
<ESC> to exit the menu and navigate one level higher.
You can skip menu entries. This takes place depending on the level of your
password. It ensures that all parameters in the user level that may only be
changed by the installer are skipped. The menu numbers are fixed, that means
they do not change if an entry (or several entries) are skipped.
If you do not press a key for more than five minutes (inactivity), the Home Screen
is automatically displayed.
After 20 seconds of inactivity, the background illumination of the display switches
off. You can switch the background illumination back on by pressing one of the
four keys. No settings are changed when you press the key, it only activates the
display illumination.
The beeping function is always activated by default. To deactivate it, set the
"#270.04 BeepEna" parameter to off.
Technical Description SI5048-11:EE4206 Page 65