Required Tools And Resources - SMA Sunny Island 5048 Installation Instructions Manual

The Sunny Island 5048
P 2 M6 x 10 mm hexagon socket screws incl. M6 contact disks
for connecting the Sunny Island 5048 to the wall bracket
Q 1 installation & instruction manual
R 1 "Warranty and Guaranty Conditions" form

2.5 Required Tools and Resources

You require the following tools and materials in order to mount and install the Sunny
Island 5048:
Tools (not included in delivery)
Cable
Cable end sleeves
Cable knife
Combination pliers
Crimping tool for cable lugs (suitable for cable cross-sections of up to 70 mm²)
Diagonal cutting pliers
Drill
Drill (e.g. stone drill), Ø 10 mm
Flathead screwdriver, 0.4 x 2.5 mm/1.0 x 10 mm/1.0 x 5.5 mm
Hexagon/Allen keys, 3 mm to 8 mm
Multimeter
Open-end/ring wrenches or socket wrench in the sizes 10/19/24/30
Phillips screwdriver, PH1 and PH2
Spirit level
Stripping pliers
Torque wrench (4 Nm to 5.7 Nm) with flathead screwdriver adapters in the
sizes 10/5.5/2.5 mm
Material (not included in delivery)
Cable ties
Heat shrink tubing
Hexagon bolts, 8 × 60 mm, washers
Ring cable lugs (with hole size for M8 screws)
Page 18 SI5048-11:EE4206
SMA
Technologie AG
Technical Description