Safety Instructions; Important Notes Regarding Operation - SMA Sunny Island 5048 Installation Instructions Manual

SMA
Technologie AG

3 Safety Instructions

3.1 Important Notes Regarding Operation

Please follow all operating and safety instructions in this manual. If these instructions are
ignored, a significant danger of injury or death arises and damage to the device,
system or plant may also result. Carefully read through the safety instructions before
installing and commissioning the device. Store the manual at an easily accessible
location.
Be sure to observe all applicable regional standards and guidelines.
The Sunny Island 5048 should only be installed or opened by suitably
qualified personnel (qualified electrician).
Never attempt to repair the device yourself. Unprofessional repair work
can be dangerous. Please consult your dealer or SMA Technologie AG if
a fault occurs.
Risk of irreparable damage!
During installation, make sure that you only use the same type of Sunny
Island 5048. Due to the different voltage levels, 230 V and 120 V types
may never be operated at once.
The operating consumption of the Sunny Island 5048 discharges the
battery. In standby mode this load is about 4 W and in idle mode it is
about 25 W. Observe this when you wish to install the Sunny Island 5048
• , but do not wish to immediately use it or
• use it for an extended period of time during the year.
It may be necessary to set the Sunny Island 5048 to Stop mode (see
section 9.3 "Deactivation" (Page 63)) and disconnect it from the battery by
means of the DC circuit breaker.
Technical Description
Safety Instructions
SI5048-11:EE4206 Page 23