Notes On This Manual; Validity; Symbols Used - SMA Sunny Island 5048 Installation Instructions Manual

SMA
Technologie AG

Notes on this Manual

1 Notes on this Manual
This technical description is intended for both the installer as well as the end customer.
It is intended to assist in correctly mounting, installing and operating as well as
understanding the operating principles of a Sunny Island 5048.

1.1 Validity

This technical description applies to firmware versions 1.004 and higher.
You can read the the firmware version of your device on the display using the "#331.02
FwVer" parameter (see section 18.3 "Diagnostics" (Page 138)).
This product may only be operated within the limits and in the intended area of
application provided in this document.
Do not use the Sunny Island 5048 for purposes other than those indicated in this
technical description. Use of the device for other purposes can void the warranty as
well as damage both the device and the system.
If you require further information, please contact the Sunny Island Hotline at the
following number +49 561 95 22 399 or by e-mail: SunnyIsland.hotline@SMA.de.

1.2 Symbols Used

To ensure optimum use of these instructions, note the following explanations of symbols
used.
This symbol indicates a danger.
If this is ignored, a significant danger of injury or death arises and
damage to the device, system or plant may also result.
This symbol indicates a notice.
Failure to observe this notice can make a working step more difficult, and may
hinder optimum operation of the device.
This symbol indicates an example.
Here you will find further concrete examples of operations and device behavior.
Technical Description SI5048-11:EE4206 Page 9