Device; Hdd - EverFocus VANGUARD 16x8 User Manual

16ch / 8ch / 4ch hybrid dvr

Table of Contents

4.1.3

Device

You can configure the HDD and PTZ settings on this page.

4.1.3.1.1 HDD

You can configure the HDD settings on this page. Please connect the HDD(s) to the DVR in

advance and ensure the power and SATA cables are properly connected between the DVR

and HDD(s). After connecting the HDD(s) to the DVR, the DVR will automatically detect the

connected HDD(s) and listed all the connected HDD(s) in the below field.

For the first time connected HDDs, the status will show "Unformat" in the state column,

users will have to format the HDDs before you can use it.

The HDD(s) marked with * in the No. column indicates the HDD(s) is/are being used at

present.

Edit: Click the Edit button and the below window appears. You can assign each HDD to

different Disk Type (Read/Write, Read only or Redundant) and Disk Group (Group 1 ~ 16). If

you select Disk Redundancy from the Disk Type drop-down list, the redundant disk will start

the redundant backup from the recording disk.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

Table of Contents

Show Quick Links

Table of Contents

Vanguard 8x4 Vanguard 4x2