Style Parameters Programming - btsr SMART MATRIX TWIST Operating Manual

Style Parameters Programming

This function allows you to create, modify and save up to 100 different articles (styles) and, for each one of
these styles, it allows you to program the detection parameters of IS3.. sensors.
At any time, pressing the
the IS3.. sensors or to a selectable range of sensors.
For detailed information about the individual parameters, please refer to
Features".
LOAD button, you will have the possibility to load any of the available styles to all
Select the
The example shown indicates that the Smart Matrix TWIST
terminal currently contains 2 styles
the other positions [3 to 100] are empty
Select the desired position (for instance position 1
TWIST1):
Click to highlight MACHINE.
Select the
have been set as measure unit) set the desired yarn
collection speed [0.1 ... 2000.0].
Select the
delay [2...60].
Selecting
way the yarn collecting speed through the synchronism
signal connected to the
Select again
Click to highlight
Select the
maximum and minimum twist per meter value and the
relevant error
ms; or 2000, 3000, 4000 or 5000].
If the TPI option has been chosen as measure system (by
means of the B4 push-button on the initial screen), instead
of
The TPX maximum and minimum values that can be set,
depend on the set
Select again
SMART MATRIX TWIST
Style Parameters Programming
STYLE menu item.
Speed [m/min]
Delay ctrl [s] parameter and set the desired start
Auto speed the system calculates in automatic
PRX
MACHINE and turn the selector.
TWIST ERR.
TPMmax and TPMmin
Time (in ms) [100...1000 with steps of 100
TPMmax and TPMmin, TPImax
Speed.
TWIST ERR
Section 3: "IS3.. Sensors
(TWIST1 and TWIST2);
parameter (or [y/min] if the inches
input.
parameters and set the
and TPImin will
and turn the selector.
STYLE
appear.
- 2-29 -