Oracle SL150 Library Manual page 10

Front Control Panel Removal and Replacement
Remove the Front Control Panel
Replace the Front Control Panel
Module Controller Removal and Replacement
Remove the Module Controller
Replace the Module Controller
Robot Module Removal and Replacement
Remove the Robot Module
Park and Lock the Robot
Slide Robot CRU Out of Base Module
Manually Retract the Robot
Manually Disengage the Robot
Cut the Robot Cables
Manually Remove the Robot CRU
Manually Remove the Z Platform
Clean Up After Manually Removing the Robot
Replace the Robot Module
Reinsert the Robot CRU and Unlock the Robot
Reconnect Cabling to the Base
Expansion Module Chassis Removal and Replacement (FRU)
Remove an Expansion Module
Power Down, Lock the Robot, and Remove Magazines
Remove the Floor, Cables, and Cords
Remove Operational Expansion Modules Below the Defective Module
Remove Components from the Defective Module
Replace the Expansion FRU Chassis
Install the Expansion Module Chassis
Install CRUs, Fillers, and Magazines in Replaced Module
Install the Remaining Expansion Modules
Cable the Library and Power On After Installing the Expansion Module
Base Module Chassis Removal and Replacement (FRU)
Remove the Base Module Chassis
Lock the Robot and Remove Expansion Modules
Remove Base Chassis and Parts for Reuse
Replace the Base Module Chassis
Install the Base Module into the Rack
Install the Base Module CRUs and Expansion Modules
Reinstall Magazines and Dress the Cables
Validate the Component Installation
Return CRU Components to Oracle
Lock the Robot for Shipment within a Rack
10-7
10-8
10-9
10-10
10-10
10-11
10-12
10-12
10-12
10-13
10-13
10-14
10-15
10-15
10-15
10-16
10-16
10-16
10-16
10-17
10-17
10-18
10-18
10-19
10-19
10-20
10-20
10-20
10-21
10-21
10-22
10-22
10-23
10-23
10-23
10-23
10-24
10-24
10-25
10-25
10-25
x