Oracle SL150 Library Manual page 4

Temperature and Humidity Limits
Airborne Contaminants Limits
Positive Pressurization and Ventilation - Hot Aisle Containment System (HACS)
Electrostatic Discharge
Prepare the Rack
Unpack and Acclimate the Library
Install the Base Module
Unpack the Base Module Accessory Kit
Install the Base Module Back Rails
Install the Base Module Front Rails
Connect the Base Module Front Rail to the Back Rail
Secure the Base Module Front Rail
Verify the Installation of the Base Module Front Rail
Install the Clip Nuts (square hole racks only)
Mount the Base Module
Engage the Base Module with the Rail
Remove the Cartridge Magazine with the Hex Key
Remove the Cable Clip in the Base Module
Secure the Base Module to the Rack
Install the Expansion Module
Unpack the Expansion Module Accessory Kit
Remove the Library Floor
Install Clip Nuts for the Expansion Module (for square hole racks only)
Prepare the Expansion Module by Removing the Cartridge Magazines
Install the Floor in the Bottom Expansion Module
Mount the Expansion Module
Install the Rear Rails for the Expansion Module
Secure the Expansion Module to the Rack Front
Replace the Cartridge Magazines
Label the Modules
Install the Hook and Loop Strap
Install Power Supplies and Tape Drives
Remove the Power Supply Slot Cover
Insert a Power Supply into the Slot
Remove the Drive Slot Cover
Insert a Tape Drive Tray into the Slot
Cable the Library
Cable the Expansion Modules
Connect Cables to the Drives and Power Supplies
Connect the Network Port
Align and Dress the Cables and Cords
2-1
2-2
2-3
2-3
2-4
2-5
2-5
2-6
2-7
2-8
2-9
2-9
2-10
2-11
2-12
2-12
2-13
2-14
2-14
2-15
2-16
2-17
2-18
2-19
2-19
2-21
2-22
2-23
2-23
2-23
2-24
2-25
2-27
2-27
2-28
2-28
2-29
2-29
2-31
2-32
2-32
iv