Install The Drive Slot Cover; Power Supply Removal And Replacement - Oracle SL150 Library Manual

Identify the tape drive firmware version and upgrade if necessary. See
3.
Firmware.

Install the Drive Slot Cover

A drive filler covers an empty drive tray slot.
Position the tape drive cover with the spring fingers facing up.
1.
Grasp the captive screws and guide the cover into the tape drive slot.
2.
Tighten both thumbscrews.
3.

Power Supply Removal and Replacement

The power supply is a CRU that can easily be removed and replaced.
WARNING:
Do not operate the library with an open and empty power supply or tape
drive slot. Always have a cover in place.
• Remove the Power Supply
• Replace the Power Supply
• Remove the Power Supply Slot Cover
• Install a Power Supply Slot Cover
Power Supply Removal and Replacement
Update
Chapter 10
10-5