Replace The Expansion Fru Chassis; Install The Expansion Module Chassis; Install Crus, Fillers, And Magazines In Replaced Module - Oracle SL150 Library Manual

Hide thumbs Also See for SL150:
Table of Contents

Advertisement

Remove the functional components as applicable:
1.
Remove the failed Expansion Module.
2.

Replace the Expansion FRU Chassis

Replacing the Expansion Module is very similar to installing a new Expansion Module.

Install the Expansion Module Chassis

Install CRUs, Fillers, and Magazines in Replaced Module

Install the Remaining Expansion Modules
Cable the Library and Power On After Installing the Expansion Module
Install the Expansion Module Chassis
Install the Expansion Module in the rack below an existing module.
Grasp the Expansion Module chassis by the sides and remove it from the shipping
1.
carton.
Remove the magazines from the Expansion Module.
2.
See
If this will be the bottom module of the library, install the library floor now.
3.
See
Mount the module.
4.
See
Install the rails.
5.
See
Secure the module.
6.
See
Install CRUs, Fillers, and Magazines in Replaced Module
Reinstall the functional components removed from the defective Expansion Module.
Install the module controller.
1.
See
Remove the Drive Tray
Remove the Drive Slot Cover
Remove the Power Supply
Remove the Power Supply Slot Cover
Remove the Module Controller
Prepare the Expansion Module by Removing the Cartridge
Install the Floor in the Bottom Expansion
Mount the Expansion
Module.
Install the Rear Rails for the Expansion
Secure the Expansion Module to the Rack Front
Replace the Module
Controller.
Expansion Module Chassis Removal and Replacement (FRU)
Module.
Module.
Chapter 10
Magazines.
10-20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL150 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents