Safety - ETC ArcSystem Pro Multi-Cell RDM Installation Manual

Safety

ArcSystem products are intended for professional use only. Read the entire manual before
using this equipment.
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed
including the following:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
Do not use outdoors.
•
Do not let power supply cords touch hot surfaces.
•
Do not mount near gas or electric heaters.
•
Equipment should be mounted in locations and at heights where it will not readily be
•
subjected to tampering by unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an
•
unsafe condition.
Do not use this equipment for other than intended use.
•
SAVE THESE INSTRUCTIONS
Introduction 3