Dmx System Control; Rdm Values - ETC ArcSystem Pro Multi-Cell RDM Installation Manual

DMX System Control

ArcSystem is compliant with DMX 512-A (ANSI E1.11-2008 (R2013)).
•
DMX loss behavior is hold last look.
•
For wired DMX installation, each luminaire can be addressed to any one of the 512 DMX
addresses up to the maximum device limit of 32 devices on each DMX line. Wireless
DMX control requires a TX1 Transmitter and luminaires with the wireless ArcMesh transceiver.
For wireless DMX installation, there are up to 64 control channels available. See the ArcSystem
Installation Manual , available from etcconnect.com.

RDM Values

Manufacturer ID: 0x6574 (Electronic Theatre Controls)
Model IDs
Product Type
ArcSystem Pro Multi-Cell
DMX Profile
ArcSystem multi-cell luminaires support two DMX personality types: single-channel and multi-
channel. The single-channel personality controls all LEDs with a single DMX address. The multi-
channel personality controls individual LEDs or pairs of LEDs with up to four channels as shown
below.
Multi-channel Configuration
Note:
DMX addresses to each channel in a
luminaire. You can specify the
DMX start address and the channels
will be addressed automatically in
the order shown.
Final Installation and Operation
You cannot manually assign
Description
Pro Two-Cell
Pro Two-Cell Emergency
Pro Four-Cell Square
Pro Four-Cell Square Emergency
Pro Four-Cell Linear
Pro Four-Cell Linear Emergency
Pro Eight-Cell
Pro Eight-Cell Emergency
Pro Four-Cell Round
Pro Four-Cell Round Emergency
Pro Four Cell Pendant
Pro Four Cell Pendant Emergency
1 2
Two-Cell
1 2
3 4
Four-Cell Square/
Round/Pendant
Model ID
0x1207
0x1307
0x1208
0x1308
0x1209
0x1309
0x120C
0x130C
0x120A
0x130A
0x120B
0x130B
1 2 3 4
Four-Cell Linear
1 1 2 2
3 3 4 4
Eight-Cell
33