Introduction; Important Safety Information - ETC High End Systems SolaWash 2000 User Manual

Introduction

This manual provides important information for the safe installation, configuration, and
maintenance of your High End Systems SolaWash 2000 fixture. For your safety, read this entire
manual prior to installing, operating, or servicing the fixture.
ETC recommends that you update your fixture with the latest version of software before you
use the fixture. Software is available for free download from the ETC website:
etcconnect.com/Products/Automated-Fixtures.
View Software Version on page 15
• See
currently installed on your fixture.
Configure the Fixture on page 13
• See

Important Safety Information

Please read all instructions prior to assembling, mounting, and operating this equipment.
Continued and safe operation of this fixture is the responsibility of the operator. This manual
will give tips for that continued safe operation. At any time please contact Technical Services
for any safety concerns.
The following international note, caution, and warning symbols appear in margins throughout
this manual to highlight important messages.
Note:
CAUTION:
equipment surfaces may reach very high temperatures. Allow the
fixture to cool before handling or servicing.
CAUTION:
undefined or unwanted consequences of an action, potential for data loss or
an equipment problem.
WARNING:
occur, people may be harmed, or there are serious or dangerous
consequences of an action
WARNING:
situations where there is a risk of electric shock.
All ETC High End Systems documents are available for free download from our website:
etcconnect.com/Products/Automated-Fixtures.
Please email comments about this manual to: TechComm@etcconnect.com.
Introduction
Notes are helpful hints and information that is supplemental to the main text.
Hot Surfaces. This statement indicates that while operating,
A Caution statement indicates situations where there may be
A Warning statement indicates situations where damage may
RISK OF ELECTRIC SHOCK! This warning statement indicates
to determine which version of software is
for instructions about updating your fixture.
1