Emergency Operation And Test - ETC ArcSystem Pro Multi-Cell RDM Installation Manual

Emergency Operation and Test

It is important to test ArcSystem emergency systems regularly because they are life safety
devices. NOT SELF-TESTING PER ANSI/NFPA 101 - This equipment is not self-testing in
conformance with the Life Safety Code, ANSI/NFPA 101. ANSI/NFPA 101 Life Safety Code
requires testing of life safety devices every 30 days.
To test the emergency functionality of this device, disconnect the sense circuit.
WARNING:
power to the system before installation, maintenance, cleaning, or any
other system modification could result in serious injury or death.
AVERTISSEMENT :
Négliger de débrancher toutes les sources d'alimentation du système avant
l'installation, l'entretien, le nettoyage ou toute autre modification du
système peut causer des blessures graves ou la mort.
De-energize main feed to ArcSystem and follow appropriate Lockout/Tagout
procedures as mandated by NFPA 70E. It is important to note that electrical
equipment such as breaker panels can present an arc flash hazard if
improperly serviced. This is due to the high amounts of short-circuit current
available on the electrical supply to this equipment. Any work must comply
with OSHA Safe Working Practices.
CAUTION:
point. To reduce the risk of electric shock, disconnect both the branch circuit-
breakers or fuses and emergency power supplies before servicing.
ATTENTION :
d'alimentation. Pour réduire le risque d'électrocution, débranchez les
disjoncteurs de dérivation ou les fusibles et les alimentations de secours avant
de procéder à l'entretien.
Test the ArcSystem emergency system as described:
1. Turn off power at the normal circuit breaker.
2. Test the system per ANSI/NFPA 101 Life Safety Code.
Compliance
For current and complete compliance information, view the product datasheets at
etcconnect.com/ArcSystem.
Final Installation and Operation
RISK OF DEATH BY ELECTRIC SHOCK! Failure to disconnect all
RISQUE DE MORT PAR DÉCHARGE ÉLECTRIQUE!
This equipment has more than one power supply connection
Cet équipement possède plusieurs points de connexion
37