WAGO 750 Series System Manual page 24

System Features
Observe the following system supply requirements:
• Use voltage sources with safe extra-low voltage (SELV, PELV).
• Power must be supplied simultaneously to all system supply inputs.
WAGO recommends using the same voltage source to realize the power supply.
• Be sure maximum permissible current values are not exceeded.
• Use an external fuse to protect the system supply of each power supply.
Product-specific information is available from the technical data in the respective
Product
24 System manual | Version: 3.0.2
Manual.
Serie 750, 753
Figure 12: System Supply Input (example)
&