Power Jumper Contacts; Din-Rail Contact - WAGO 750 Series System Manual

Serie 750, 753

3.1.5.2 Power Jumper Contacts

The field power supply is distributed in the I/O system via the power jumper contacts. The
contacts on the left side are male contacts; those on the right side are touch-proof spring
contacts.

3.1.5.3 DIN-Rail Contact

Many components of the I/O system transmit electromagnetic interference to the DIN-rail
via DIN-rail contacts. The DIN-rail contacts of the modules are automatically connected
when they are snapped on to the DIN-rail.
For the I/O modules, there is usually no direct connection between the DIN-rail contact
and the ground connections of the wiring interface and the associated power jumper con-
tacts. The specific design is described in
System manual | Version: 3.0.2
Figure 9: Example: Power Jumper Contact Arrangement (left: male contacts; right: spring contacts)
& Product
Manual.
System Features
Figure 8: Data Contacts
21