WAGO 750 Series System Manual page 30

Planning
Coordinate Model
Note
Modified Coordinate Model
In product documentation published before 2021, the height (y) and depth (z) have been
swapped!
• Width = Dimension along X axis = Horizontal in nominal mounting position; parallel to
DIN-rail longitudinal axis
• Height = Dimension along Y axis = Vertical in nominal mounting position
• Depth = Dimension along Z axis = Horizontal in nominal mounting position; perpendic-
ular to DIN-rail longitudinal axis
30 System manual | Version: 3.0.2
Figure 14: Installation Clearances
Figure 15: Coordinate model: width (x), height (y), depth (z)
Serie 750, 753