Elements Of The Dx-Key Led2 External Control Unit - Eaton RAMO5 Manual

9 Control Unit

9.1 Elements of the DX-KEY LED2 external control unit

9.1 Elements of the DX-KEY LED2 external control unit
156
Table 23: Keypad elements – Buttons
Button Command
OK
START
STOP
UP
DOWN
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
Explanation
• Navigating in parameter mode
• Opens and closes the parameter interface(press the button and hold
it down for more than two seconds)
• Saves parameter changes
• Changes the value being displayed: A, rpm, etc. (real-time informa-
tion)
• Parameter selection
• Reset – Resetting after an error message
• Increment numeric value or parameter number
• Decrement numeric value or parameter number