2 Engineering
2.1 Rapid Link modules
RAMO5 and RASP5 rapid Link modules are installed in the direct vicinity of
the drives. Design and installation are carried out in accordance with the
required specification and local conditions.
Connection to the power and data bus is possible without interruption at any
location.
The below example with RAMO5 provides a simplified overview.
①
②
⑤
④
Figure 8:
Example showing how to use a RAMO5 unit
a Sensor (light barriers)
b RAMO5
c Motor connection cable
d Mains connection on power bus
e AS interface
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
2.1 Rapid Link modules
③
2 Engineering
31