Abbreviations And Symbols - Eaton RAMO5 Manual

0.4 Abbreviations and symbols

￫
All the specifications in this manual refer to the hardware and
software versions documented in it.
￫
For more information on the series described in this manual,
please visit the Download Center on the Internet at the Eaton
website.
http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/
Kundensupport/DownloadCenter/index.htm
Enter "MN040034DE" in the Quick Search field and click on
Search.
Alternatively, you can use the selection lists and entries to
switch, protect and drive motors → Rapid Link and click on
Search to find the information available on the topic Rapid Link
(Assembly instructions, software, manuals, catalogs, product
information).
The following symbols and abbreviations are used in this manual:
EMC Electromagnetic compatibility
FWD Forward (clockwise rotating field)
LCD Liquid Crystal Display (liquid crystal display)
PES Functional ground, PE connection (ground) of the Screen (cable)
pk Peak
PNU ParameterNumber
RAMO Rapid Link Motor Starter
RASP Rapid Link Speed Control
REV Reverse (left-hand rotating field)
STO Safe Torque Off
DS Factorydefault setting
The AS-Interface logo (Actuator-Sensor-Interface, actuator-sensor interface) symbolizes
those components that comply with the EN 50295 and IEC 6026-2 standards.
The DESINA logo (DEcentralized and standardized INstAllation technology) identifies the
components that correspond to the DESINA specification.
See also:
￫
Note on spelling
The short descriptions RAMO5 and RASP5 are abbreviated for
all types RAMO5-...-...S1 or RASP5-...-...S1 according to the
type code on pages 17 and 18.
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
www.desina.de
0 About this manual
0.4 Abbreviations and symbols
9