Parameter Group 3 ("Mechanical Brake And Digital Inputs") - Eaton RAMO5 Manual

10 Parameter list
10.3 Parameter groups for RAMO

10.3.4 Parameter group 3 ("Mechanical brake and digital inputs")

Para Designation
meter
P3-04 Brake M-Level Release
P3-05 Brake Release Delay
P3-06 DI1 Logic
P3-07 DI2 Logic
P3-08 DI3 Logic
P3-09 DI4 Logic
P3-10 DI5 Logic
P3-11 t-dec Select B0
168
Table 30: Parameter group 3 ("Digital inputs/outputs")
Description
Determines the time before the mechanical brake is
released.
Determines the time between the signal to close the brake
and disabling of the drive.
0 = normally open
1 = normally closed
Note:
Change only after POWER ON/OFF active
0 = normally open
1 = normally closed
Note:
Change only after POWER ON/OFF active
0 = normally open
1 = normally closed
Note:
Change only after POWER ON/OFF active
0 = normally open
1 = normally closed
Note:
Change only after POWER ON/OFF active
0 = normally open
1 = normally closed
Note:
Change only after POWER ON/OFF active
Selection deceleration ramp bit 0
External stop function
0: deactivated
1: activated
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
Unit Min Max
s 0 2.50
s 0 25.00
– 0 1
– 0 1
DS
0
0
0
0