Checking The Delivery - Eaton RAMO5 Manual

1 Rapid Link system 5

1.2 Checking the delivery

1.2 Checking the delivery
14
￫
Before opening the packaging go over the nameplate on the
packaging and check for whether the delivered component is
the same part no. as the one you ordered.
The RAMO5 and RASP5 devices are carefully packed and sent for shipment.
Transport must only be carried out in the original packaging and with suitable
means of transport. Please take note of the labels and instructions on the
packaging, as well as of those meant for the unpacked device.
Open the packaging with adequate tools and inspect the contents immedi-
ately after receipt in order to ensure that they are complete and undamaged.
The packaging must contain the following parts:
• Motor starter (Motor Control Unit)
• One RAMO device,
• the instructional leaflet IL034084ZU.
or
• Speed Control Unit
• One RASP device,
• the instructional leaflet IL034085ZU.
Figure 2: Equipment supplied (RAMO5 or RASP5 device plus instructional leaflet)
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com