Eaton RAMO5 Manual page 82

3 Installation
3.2 Installation instructions
78
Vertical arrangement
173 mm (6.81")
Figure 40: Fixing dimensions (standard) and mounting
4 x Drill hole with thread for M6-screw.
1
Where screws are prefitted, a
2
clearance of about 12 mm should be provided between mounting surface and washer.
Tighten the screws to a torque of 1.3 Nm.
3
Vertical arrangement, center fixing
110 mm (4.33") 110 mm (4.33")
Figure 41: Fixing dimensions (center)
Two M6 screws, tightening torque 1.3 Nm.
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
1
2
3