Table of Contents
Advertisement
Parameter
Designation
P0-57
V q-Axis
P0-58
UserProgramID
P0-59
Value@Pointer
P0-60
reserved
P0-61
reserved
P0-62
t-accNET
P0-63
f-Ref Interface0
P0-64
Actual Switching Frequency
P0-65
System Software Version
Description
Motor parameters for PM control
U
ning of the line) Pressing the UP key on the drive keypad the
display will change to U
ID of a program generated by the Function Block Editor.
This ID can be set by the user when developing the program.
Pointer on an internal parameter
Displays the value selected with P5-09.
Ramp time received via fieldbus interface.
Speed reference received via fieldbus interface
Actual switching frequency.
The value may be less than the one set with P2-22.
See also P2-23
System Software Version
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
and U
of the stator voltage. 1st value = U
d
q
("q" at the beginning of the line).
q
10 Parameter list
10.4 Parameter groups for RASP
Unit
("d" at the begin-
d
s
Hz/rpm
kHz
–
175
Advertisement
Table of Contents
