Eaton RAMO5 Manual page 167

Parameter Designation
P0-26 kWh Meter
P0-27 MWh Meter
P0-28 Application Version
P0-28 System Version
P0-29 n/a
P0-29 NoOfInputPhases
P0-29 FrameSize
P0-29 kW/HP
P0-29 Power@Ue
P0-29 Device Voltage
P0-29 DeviceType
P0-30 Serial Number
P0-31 t-Run
P0-32 t-Run since Restart
P0-33 t-Run since Trip
P0-34 t-HoursRun Enable
P0-36 DC-Link Log
P0-37 DC-Link V-Ripple Log
Description
Energy Consumption kWh Meter (not resettable)
Displays the energy consumption in kWh. When the
value reaches 1000, it is reset back to 0 and the number
of MWh in P0-27 is increased by 1. The value cannot be
reset and shows together with P0-27 the energy
consumption since the day of manufacture.
Energy Consumption MWh Meter (not resettable)
Displays the energy consumption in MWh. The value
cannot be reset and shows together with P0-26 the
energy consumption since the day of manufacture.
Application Version
Level 1: Application version + Check sum
Level 2: System version + Check sum
System Version
Device Information
Number of input phases
Frame Size
Motor Power
Device Power at Device Voltage Rating
Device Voltage Rating
Device Type
Serial Number of the device (don't use for new devices)
Total operating time of the drive since the date of manu-
facture
Displayed in hours, minutes and seconds. Pressing the
UP key on the drive keypad will change the display from
"hours" to "minutes and seconds".
Run time since power on or last Reset
Total operating time of the drive since the last trip
occured or power down in hours, minutes and seconds.
Pressing the UP key on the drive keypad will change the
display from "hours" to "minutes and seconds".
Total operating time of the drive since the last trip
occurred
Displayed in hours, minutes and seconds. Pressing the
UP key on the drive keypad will change the display from
"hours" to "minutes and seconds".
Total operating time of the drive since the last drive
ENABLE signal was applied.
Displayed in hours, minutes and seconds. Pressing the
UP key on the drive keypad will change the display from
"hours" to "minutes and seconds".
DC link voltage log
Displays the most recent 8 samples of the DC bus
voltage prior to a drive trip condition occurring.
The sample interval is 256 ms.
DC bus Voltage Ripple Log
Displays the most recent 8 samples of the ripple of the
DC bus voltage prior to a drive trip condition occurring.
The sample interval is 20 ms.
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
10 Parameter list
10.3 Parameter groups for RAMO
Unit
kWh
MWh
hh:mm:ss
hh:mm:ss
hh:mm:ss
hh:mm:ss
V
163