Installing The Rail Kit; Figure 6. Slide Box Contents; Figure 7. Installing The Rear Rail - Intel R2600SR Series Setup And Service Manual

These parts appear in the illustration below.
2.2.1

Installing the Rail Kit

To install the rail kit, complete the steps below:
Note: The holes on the front and rear of the rack may be either square or round.
1. Select the first slide rail to be installed.
2. Make sure the slide rail is shortened (compressed) to the shortest position.
3. While standing in front of the rack cabinet, line up the pins on the rear of the slide rail with the flange
holes at the rear of the rack.
4. Push the slide rail so that the pins and the latch snap into place.
14
Intel® Server System R2600SR Setup and Service Guide

Figure 6. Slide box contents

Figure 7. Installing the rear rail