Safeline Signature Operating And Instruction Manual page 89

PRINT ALL SETTINGS - Press the soft key adjacent
to PRINT ALL SETTINGS to obtain a printout of the
current values of all the Engineer Mode and QA
Inspector Mode settings.
PRINT SHIFT REPORT - Press the soft key adjacent
to PRINT SHIFT REPORT to obtain a printout of the
stored entries from the start of the current shift.
Notes.
1) The content of the shift-report printout will
depend on which of the following two options
were selected by the QA Inspector.
(See the Shift Report Options section earlier).
a) Any reject relay operations during the
shift,
and
b) Any settings that have been modified
during the shift
2) After printing the shift-report the detector will
clear all the current shift information and start
collecting information for the next shift.
QA Inspector Test Menu
From the QA Inspector Mode press the soft key
adjacent to TEST to access the QA Operator Mode,
(performance checking).
(See the QA Operator Mode section for details of this
operating mode).
Note. The performance check printout occurs as soon
as a performance check is completed by either the
QA Inspector or one of the QA Operators.
4618-021
OPERATING INSTRUCTIONS
73