Safeline Signature Operating And Instruction Manual page 102

b) For loose products
i) Place the metal contaminant on the centre
of the conveyor belt.
ii) Pass the product with the metal contaminant
through the detector aperture.
6 Press the soft key adjacent to REJECT TIME.
a) For packaged or separate products
i) Place the metal contaminant at the front or
leading edge of the product package.
ii) Pass the product with the metal contaminant
attached through the detector aperture,
ensuring that the product doesnot slip or
skew.
iii) Use the cursor Up and Down keys to adjust
the Reject Time so that the metal
contaminant is rejected consistently and
accurately.
b) For loose products
i) Place the metal contaminant on the centre
of the conveyor belt.
ii) Pass the product with the metal contaminant
through the detector aperture.
iii) Use the cursor Up and Down keys to adjust
the Reject Time so that the metal
contaminant is rejected with the minimum of
wasted product.
7) Press the Enter key to accept the new
settings.
8) Press the Enter key a second time to proceed
to the next display.
9) Press the soft key adjacent to NO.
86
OPERATING INSTRUCTIONS
iii) Use the cursor Up and Down keys to adjust
the Signal Delay so that the reject device
operates just as the metal contaminant
reaches it.
4618-021