Changing Security Codes
1)
Press the ETC key to step through the
following four displays,
2)
Press the soft key adjacent to the required
security code (i.e. OPERATOR,
SUPERVISOR, ENGINEER, QA
INSPECTOR or VIEWING
3)
If the soft key adjacent to SUPERVISOR is
pressed the display opposite will appear.
4)
The cursor appears under the first digit. Use the
up and down keys to change the number and
then press the ENTER key. A * replaces the
number and the cursor moves to the next digit.
5)
Repeat Step 4) for the remaining three digits.
60
OPERATING INSTRUCTIONS
4618 - 021