Speed Setup; Auto. Tracking Setup; Detection Buzzer; Reject Inhibit (Versions Xt1.00 And Xt1.01 Only) - Safeline Signature Operating And Instruction Manual

OPERATING INSTRUCTIONS

Speed setup

Press the soft key adjacent to Speed setup to enter
the Speed setup menu.
Refer to the Speed setup section for more
information.

Auto. tracking setup

Press the soft key adjacent to Auto. tracking setup to
enter the Auto. tracking setup menu.
Refer to the Auto. tracking setup section for more
information.

Detection Buzzer

ON - Select ON so that the buzzer will sound when
metal is detected.
OFF - Select OFF to prevent the buzzer sounding
when metal is detected.
Note:
The buzzer will always sound if a key is pressed or a
fault occurs irrespective of the setting here.
Reject inhibit (Versions XT1.00 and
XT1.01 only)
WARNING
DO NOT USE THIS FACILITY TO INHIBIT THE
REJECT DEVICE DURING MAINTENANCE WORK.
ALWAYS REMOVE THE POWER SUPPLY TO THE
REJECT DEVICE BEFORE MAINTENANCE WORK
IS STARTED.
YES - Select YES to override the operation of the
reject device during setting up operations.
NO - Select NO for normal use
4618 - 021 45