Alarm If Overdue; Change Qa Operator Code - Safeline Signature Operating And Instruction Manual

OPERATING INSTRUCTIONS

Alarm If Overdue

An alarm output is available if a Performance Check
becomes either due or overdue.
DUE - Press the soft key adjacent to DUE if an alarm
is required when a Performance Check is due.
OVERDUE - Press the soft key adjacent to
OVERDUE if an alarm is required when a
Performance Check is overdue.

Change QA Operator Code

This display allows the setting of up to nine QA
operator security codes.
Press the soft key adjacent to the dotted line to select
a QA operator number (1 to 9).
Press the soft key adjacent to #### and change the
code number using the cursor key and up and down
keys.
Press the ENTER key to store the new code in
memory.
Repeat the operation for as many QA Operator's as
required.
Press the ETC key to return to the first display of the
QA Inspector Mode.
QA Inspector Print Menu
From the QA Inspector Mode press the soft key
adjacent to PRINT to access the print-on-demand
facilities.
For sample printouts see Appendix C.
72 4618 - 021