Safeline Signature Operating And Instruction Manual page 105

2) If you only need to select the timer group for
the current product number and not adjust any of
the timer group properties then
a) Select the soft key adjacent to NO, and go
back to the Engineer Mode section.
!
CAUTION
Although NO was selected the group will be
changed to the group letter selected in 1).
else
b) Select the soft key adjacent to YES, and
proceed to step 3)
3)Press the soft key adjacent to tm2[G]
4)
a) If the display opposite appears
i) Press the soft key adjacent to NO if
you are setting up the timer for the first
time,
ii) If you are fine tuning an existing tm2G
setting, press the soft key adjacent to
YES, then go to step 10).
else
b) Proceed to step 5).
4618 - 021
else
OPERATING INSTRUCTIONS
In the following displays 'X' represents the timer group A, B or C
as selected at step 1); tmxx represents the timer type that is
currently selected for this timer group.
89