Safeline Signature Operating And Instruction Manual page 149

Table of Contents

Advertisement

1,2
Command
Direction
'Q15,' h ',' m
in/out
'Q15?'
in
'Q16,' h ',' m
in/out
'Q16?'
in
'Q17,' h ',' m
in/out
'Q17?'
in
'Q18,' h ',' m
in/out
'Q18?'
in
'Q19,' n
in/out
'Q19?'
in
'Q20,' n ',' o
in/out
'Q20?' n
in
'Q21,' n
in/out
'Q21?'
in
NOTES
1
Those characters shown inside single quotes ' ', are to be sent as shown in the identifier column. (ASCII
representation of characters is used).
2
xx? is a request to the detector for information, (where xx is one of the identifiers in the identifier tables).
3
The direction that the identifier may be transmitted is with reference to the detector.
( out = transmitted by detector, in = received by detector ).
4
The "Type" field in the above table is used to categorise the identifiers into their sphere of influence.
Thus :-
F: Factory Setting.
X: Neither of the above.
P: Product-dependent setting.
4618 - 021
3
Shift Report Interval Time
h = Two digit number, of the hour, in the range [0..24].
m = Two digit number, of the minute, in the range [0..59].
Maximum shift report interval time is 24:00
Shift Report Interval ?
Shift Report Start Time
h = Two digit number, of the hour, in the range [0..23].
m = Two digit number, of the minute, in the range [0..59].
Maximum shift report start time is 23:59
Shift Report Start Time ?
Test Interval
h = Single digit number, of the hour, in the range [0..8].
m = Two digit number, of the minute, in the range [0..59].
Maximum test interval time is 08:59
Test Interval ?
Overdue Period
h = Single digit number, of the hour, in the range [0..4]
m = Two digit number, of the minute, in the range [0..59]
Maximum overdue period must be less than half of 'Test
Interval and less than 04:59
Overdue Period ?
Alarm if Due/Overdue Setting
n = 0 : DUE
n = 1 : OVERDUE
Alarm if Due/Overdue Status ?
QA Operator Number and Code
n = Operator number, a single digit number in the range
[1..9].
o = 4 digit code for the operator n, in the range [0..9999].
QA Operators code ?
Printer type
n = 0 : FIXED
n = 1 : PORTABLE
Printer type ?
Description
APPENDIX D
4
Type
X
X
X
X
X
X
X
133

Advertisement

Table of Contents
loading

This manual is also suitable for:

Signature 2

Table of Contents