Safeline Signature Operating And Instruction Manual page 120

Testing the Reject Device.
23)
a) Check the setting of tm3G by passing the
product and metal contaminant through the
aperture of the detector.
b) Check the reject device operates correctly
with the metal contaminant at both the front
and rear of the pack
c) Check the reject device operates correctly
with different sizes of metal contaminant.
d) Repeat a) to c) above at the lowest and
highest speeds.
24) If for any reason the calibration of the tm3G timer
is not correct return to step 1) and repeat all the
steps.
104
OPERATING INSTRUCTIONS
4618-021