Table of Contents
Advertisement
The following guides are intended to help users
setting up a detector for the first time.
The guides are written as a sequence of step-by-step
references to instructions in other sections of this
manual.
The guides highlight settings which have to be
adjusted for most applications before correct
operation of the detector may begin.
Before attempting to use the 'guides' the operator
should read the following sections of this manual :
1) Principles Of Operation, page 1
2) Features, page 3
3) The Control Panel, page 17
4) The Page Display System, page 18
5) Entering Security Codes, page 19
6) Changing Numeric Values, page 20
Don't worry if you didn't understand
everything in the sections above. The
guides make things easy !
Introduction To The 'How to...' Boxes
Alongside the guides you will find a few boxes with
titles that begin with the words
'How to...'.
These boxes detail in a step-by-step fashion how to
perform certain simple routines with your detector;
e.g. 'How to... Print',
'How to... Carry out a Performance Test'.
etc.
Please remember to record all settings in the Settings
Sheets at the rear of the manual.
20
INTRODUCTION TO THE GUIDES
OPERATING INSTRUCTIONS
There are four guides:
a) Universal Settings Guide.
This guide lists the settings which control various
operating characteristics of the detector. These
settings may be altered to suit the particular
requirements of the application. The word
"Universal" is used as these settings affect all
product numbers.
b) Product Number Settings Guide.
The detector has the ability to store settings for 21
different product numbers. Each product number
contains a group of settings which are set to
optimise the detector performance for a particular
product. This guide takes the user through the
setting up of this group of settings for particular
product types.
c) Performance Validation Guide.
The detector supports many features that can be
used to validate the performance of the detector.
This guide takes the user through the required
settings for performance validation (quality
assurance) operation.
d) Speed Change Guide
If the product speed changes a number of settings
will need adjusting to compensate for the change
in speed. This guide takes the user through the
required setting up following a change in the
operating speed of the product.
Item(s) referred to in some guides may be options not
available on your detector - if so ignore the item(s).
4618 - 021
Advertisement
Table of Contents
