The warm settings for air-fuel ratio control by the LMV37.4... are now completed.
27.11.5 Warm settings for modulating mode («G mod pneu», «Gp1 mod pneu»
and «Gp2 mod pneu»)
27.11.6 Cold settings for «G mod», «Gp1 mod», «Gp2 mod» and «Lo mod» and
«Ho mod»
27.11.7 Cold settings for «G mod pneu», «Gp1 mod pneu» and «Gp2 mod
pneu»
Building Technologies Division
Industry Sector
P
V
h min s
P
V
h min s
Note
Refer to chapter Warm settings for modulating mode («G mod», «Gp1 mod», «Gp2
mod» and «Lo mod»)! Here, only the air requires adjustment with
Note
Refer to chapter Warm settings for modulating mode («G mod», «Gp1 mod», «Gp2
mod» and «Lo mod»)! With no flame, however, no actuator travel and no automatic
operation after the settings have been made.
Note
Refer to chapter Warm settings for modulating mode («G mod», «Gp1 mod», «Gp2
mod» and «Lo mod»)! With no flame, however, no actuator travel and no automatic
operation after the settings have been made. Here, only the air requires adjustment
with
.
A
Basic documentation LMV37.4...
27 Parameter level
When symbol ▼ or ▲ is no longer highlighted,
you can press ESC a second time.
%
ESC
%
.
A
193/235
CC1P7546en
20.09.2013