Siemens LMV37.4 Series Basic Documentation page 214

Par. Parameter
no.
• Error history: 701-725.02.Diagnostic code
• Error history: 701-725.03.Error class
• Error history: 701-725.04.Phase
• Error history: 701-725.05.Startup counter
725 Error history: 701-725.06.Output
900 Process data
903 Current output
Index 0 = fuel
Index 1 = air
922 Incremental position of actuators
Index 0 = fuel
Index 1 = air
935 Absolute speed
936 Standardized speed
942 Active load source
1 = output during curve settings
2 = manual output
3 = default output via building automation
4 = default output via analog input
5 = external load controller via contacts
947 Result of contact sensing (bit-coded)
Bit 0.0 = 1: Pressure switch-min
Bit 0.1 = 2: Pressure switch-max
Bit 0.2 = 4: Pressure switch valve proving
Bit 0.3 = 8: Pressure switch air pressure switch
Bit 0.4 = 16: Load controller OPEN
Bit 0.5 = 32: Load controller ON
Bit 0.6 = 64: Load controller CLOSE
Bit 0.7 = 128: Safety loop
Bit 1.0 = 1: Safety valve
Bit 1.1 = 2: Ignition
Bit 1.2 = 4: Fuel valve 1
Bit 1.3 = 8: Fuel valve 2
Bit 1.4 = 16: Fuel valve 3 / pilot valve
Bit 1.5 = 32: Reset
214/235
Building Technologies Division
Industry Sector
Number of Type Edit
elements
25 Std_u8 read only
25 Std_u8 read only
25 Std_u8 read only
25 Std_s32 read only
25 Output read only
2 Output read only
2 Std_s16 read only
1 Std_u16 read only
1 Std_s16 read only
1 Selection read only
2 Std_u8 read only
Basic documentation LMV37.4...
28 Parameter list LMV37.4...
Value range Resolution
Min Max
0 255 1
0 6 1
0 255 1
0 99999999 1
0% 100 % 0.1%
0% 100% 0.1%
-50° 150° 0.01°
0 6553.5 0.1
-200% 200% 0.1%
0 255 1
0 255 1
Default Password level
setting
0 Info / Service
0 Info / Service
0 Info / Service
0 Info / Service
0% Info / Service
0% Info / Service
0° Info / Service
0 SO
0% Info / Service
0 SO
0 Info / Service
CC1P7546en
20.09.2013