Parameters With Index, With No Direct Display; Using The Example Of Parameter 701: Errors - Siemens LMV37.4 Series Basic Documentation

27.10 Parameters with index, with no direct display

27.10.1 Using the example of parameter 701: Errors

Refer to chapter Error code list!

Note
Can be deleted for service, refer to chapter Parameter list!
P
P
P
To the next index
P
Building Technologies Division
Industry Sector
V h min s %
V h min s %
V h min s %
V h min s %
Basic documentation LMV37.4...
27 Parameter level
HIStorie 700: for error history.
/reset
Press to select parameter 701.
Display: Parameter 701. flashes, index 01: and value
201 do not.
/reset
Press to go to index 01:.
/reset
Display: Parameter 701. does not flash, index 01:
flashes, value 201 does not.
Press to select the index:
.01 = error code
.02 = diagnostic code
.03 = error class
.04 = error phase
.05 = startup counter
.06 = output
Example:
Parameter 701., index 05: for startup counter, diagnostic
code ._._
Press to go to the
/reset
parameter level.
Back to the previous
index
179/235
CC1P7546en
20.09.2013