Siemens LMV37.4 Series Basic Documentation page 207

Par. Parameter
no.
2 = active (high active)
Load controller contacts X5-03 are deactivated when function is active!
192 Switching back to pilot minimum time
193 Switching back to pilot maximum time
194 Repetition limit no flame at the end of safety time (TSA)
1 = no repetition
2...4 = 1...3 repetitions
195 Repetition limit heavy oil direct start
1 = no repetition
2...15 = 1...14 number of repetitions
16 = constant repetition
196 Repetition limit air pressure failure
1 = no repetition
2 = 1 repetition
200 Basic unit
201 Burner operating mode (fuel train, modulating / multistage, actuators,
etc.)
-- = undefined (delete curves)
1 = G mod
2 = Gp1 mod
3 = Gp2 mod
4 = Lo mod
5 = Lo 2-stage
6 = Lo 3-stage
7 = G mod pneu
8 = Gp1 mod pneu
9 = Gp2 mod pneu
10 = LoGp mod
11 = LoGp 2-stage
12 = Lo mod 2 fuel valves
13 = LoGp mod 2 fuel valves
14 = G mod pneu without actuator
15 = Gp1 mod pneu without actuator
16 = Gp2 mod pneu without actuator
17 = Lo 2-stage without actuator
Building Technologies Division
Industry Sector
Number of Type Edit
elements
1 Time edit
1 Time edit
3 Std_u8 edit
1 Std_u8 edit
1 Std_u8 edit
1 Selection edit / clear
Basic documentation LMV37.4...
28 Parameter list LMV37.4...
Value range Resolution
Min Max
5 s 120 s 0,2 s
30 s 108 min. 0,2 s
1 2 1
1 16 1
1 16 1
1 27 1
Default Password level
setting
30 s SO
60 min. SO
0 OEM
3 SO
3 OEM
undefined SO
207/235
CC1P7546en
20.09.2013