Siemens LMV37.4 Series Basic Documentation page 201

A
and
or
as well as
and
F A
and
or
To the next curvepoint
A
and
or
as well as
and
F A
and
or
To the next curvepoint
A
and
or
as well as
and
F A
and
or
Building Technologies Division
Industry Sector
P
V h min s
P
h min s
V
P
V h min s
Basic documentation LMV37.4...
27 Parameter level
Low-fire position P1 can be set only when
symbol ▲ or ▼ is no longer highlighted.
Set stage 1 P1.
Fuel valve V1 is switched on.
Keep depressed and, for VSD
A
Press or
%
When symbol ▲ or ▼ is no longer
highlighted, the next curvepoint P2on can
be selected with
Curvepoint P2on can be set only when
symbol ▲ or ▼ is no longer highlighted.
Set switch-on point stage 2 P2.
Fuel valve V2 is still off.
Keep depressed and, for VSD
A
Adjust the value with
%
When symbol ▲ or ▼ is no longer
highlighted, the next curvepoint P2_d can
be selected with
Back to the previous
curvepoint
Curvepoint P2_d can be set only when
symbol ▲ or ▼ is no longer highlighted.
Fuel valve V2 is still off and the system remains
at curvepoint P2on. Presetting of operating
stage P2 with no travel, aimed at cutting the
operating time if there is shortage of air.
Keep depressed and, for VSD
A
%
Press or
When symbol ▲ or ▼ is no longer
highlighted, the next curvepoint P2 can be
selected with .
and
F A
to adjust the value.
.
and
F A
or .
.
and
F A
to adjust the value.
201/235
CC1P7546en
20.09.2013
.
.
.