Siemens LMV37.4 Series Basic Documentation page 88

88/235
Building Technologies Division
Industry Sector
Symbols
Permissible position range
In Standby mode: Actuator is allowed to travel within the permissible
position range, but is always driven to the home position; must be in the
home position for phase changes
0°/10% Position as supplied (0°)
90°/100% Actuator fully open (90°)
Input/output signal 1 (ON)
Input/output signal 0 (OFF)
Input permissible signal 1 (ON) or 0 (OFF)
*) Alternative to pressure switch-max (Pmax)
**) Only with valve proving via pressure switch-min (Pmin)
Basic documentation LMV37.4...
7 Basic unit
CC1P7546en
20.09.2013